What does the lock do?
Once the locking pin sits in the receiver, the sliding panel cannot travel along the rail. Unlock it and the panel slides freely again.
Sliding glass balcony systems
Sliding Glass Balcony Lock for the Bottom Rail
The glass balcony lock secures a sliding glass panel at bottom-rail level and stops it travelling sideways along the rail. The body measures 44.00 × 45.00 mm; total height including the Ø 8.00 mm locking pin is 77 mm. Depending on the system, it mounts to the lower corner of the panel or to a connection point on the bottom rail.
Product details
Product photographs, installed view and dimensional drawing.
Open any image to view it at full size.
How the lock works
Mounting position, alignment and package details.
The lock body and receiver must be aligned for the door or panel to move freely when unlocked. Check the profile dimensions and installation space before ordering.
Glass balcony manufacturersInstallation teamsResidential projectsDealers and wholesale buyers
Noray · Made in TürkiyeApplication guide
What to consider when choosing a glass balcony lock
Body dimensions are only part of the decision. Rail construction, panel profile and installation clearance vary from system to system, and pin-to-receiver alignment is confirmed where the lock is fitted.
Will it fit an existing glass balcony system?
That depends on the rail construction and the clearance at the mounting point. Send a photo of the system with the profile measurements and the mounting point is assessed before you order.
What matters during installation?
The pin should enter the receiver without rubbing and must not hinder the panel's sliding movement. The receiver is positioned on the axis of the pin.
What is needed before ordering?
A photo of the system, the rail and profile measurements, and the quantity. Dealer and wholesale quotes are prepared from these details.
Frequently asked questions
Glass Balcony Lock questions
Send us your project details for dimensional drawings or compatibility guidance.
Request technical documentation →What are the dimensions of the glass balcony lock?
The body is 44.00 mm wide and 45.00 mm high. Total height including the locking pin is 77 mm; the pin diameter is Ø 8.00 mm.
Where is the glass balcony lock installed?
Depending on the system, on the lower corner of the glass panel or on a suitable connection point at bottom-rail level.
Does it fit every sliding glass balcony system?
Fit depends on the rail construction and the mounting clearance. Send a photo of the system and the profile measurements and this is checked before you order.
Are the keys matching?
Yes. The package includes three matching keys that open the same lock.
Which materials are used?
The exterior is powder coated; the internal mechanism uses zamak alloy.
Do you quote for bulk orders?
Yes. Dealer and wholesale quotes are prepared once the quantity and delivery details are shared.
In real applications
Locks the sliding panel at the bottom rail.
The lock body is fixed to the lower corner of the panel or to a connection point at rail level. Turning the key drives the Ø 8.00 mm pin into the receiver in the bottom profile. The mounting point must have room for the 44.00 × 45.00 mm body — how much clearance is available varies with the rail construction. Pin-to-receiver alignment is checked during installation.
Floor-level installationThe lock is aligned with its receiver on the bottom profile or rail.
Technical overview
Specifications required before ordering.
Share your application details with our technical team for dimensional drawings and compatibility guidance.
ApplicationSliding glass balcony system
Installation pointBottom rail / panel corner
Body dimensions44.00 × 45.00 mm (width × height)
Total height77 mm (locking pin included)
Locking pin diameterØ 8.00 mm
Exterior finishPowder coating
Internal mechanismZamak alloy
Package3 matching keys + connection hardware
ProductionMade in Türkiye
Body dimensions
The body is 44.00 × 45.00 mm; total height including the locking pin is 77 mm. Check the installation clearance against these figures.
Bottom-rail locking
The Ø 8.00 mm pin engages the receiver at rail level and stops sideways movement of the panel.
Compatibility check
Share rail and profile measurements and a suitable mounting point is assessed before you order.
Noray product design
Product geometry developed for its intended system
Technical documents
Dimensional and compatibility support
Ready-to-install package
Supplied with keys and connection hardware
Custom production
Evaluated according to quantity and project
For your project