Where is this lock used?
On automatic sliding glass doors at hotel, hospital, shopping-centre, market, store and office-building entrances. Installation is usually carried out by automatic door installers.
Automatic sliding door systems
Automatic Sliding Door Lock for Floor-Level Installation
The lock mounts at floor level on the bottom profile of a sensor-operated sliding glass door. Its front face is 35 mm wide and 78.00 mm high; when the Ø 10.00 mm locking pin enters the receiver, sideways movement of the glass panel is restricted. It is fitted at hotel, shopping-centre, market and store entrances.
Product details
Product photographs, installed view and dimensional drawing.
Open any image to view it at full size.
How the lock works
Mounting position, alignment and package details.
The lock body and receiver must be aligned for the door or panel to move freely when unlocked. Check the profile dimensions and installation space before ordering.
Hotels and shopping centresMarkets and retail storesHospitals and office buildingsAutomatic door installers
Noray · Made in TürkiyeApplication guide
What to know before choosing an automatic sliding door lock
A sensor-operated sliding door detects an approaching person and opens to the side on its own. The lock on this page secures that door's glass panel at floor level. Body dimensions and bottom-profile fit are weighed together when choosing.
Will it fit an existing door?
That depends on the construction of the bottom profile and the space available for mounting. Send a photo of the system with the profile measurement and suitability is checked before installation.
What matters during installation?
The pin should enter the receiver without rubbing and must not obstruct the door's opening and closing movement. Alignment is set at the receiver during fitting.
What is needed before ordering?
A photo of the system, the bottom-profile measurement and the quantity. Quotes are prepared from these details.
Frequently asked questions
Automatic Sliding Door Lock questions
Send us your project details for dimensional drawings or compatibility guidance.
Request technical documentation →What are the dimensions of the automatic sliding door lock?
The front face is 35 mm wide and 78.00 mm high. The locking pin has a diameter of Ø 10.00 mm.
Where is the lock installed?
On the bottom profile of the automatic sliding glass door, at floor level. The receiver sits in the floor or in the bottom profile.
Does it fit every automatic door system?
Fit depends on the bottom-profile construction and the mounting space. To be sure, send a photo of the system and the profile measurement.
What is included in the package?
Three keys and connection hardware.
Do you provide pricing for bulk orders?
Yes. Share the quantity, application and delivery details and a project-specific quote is prepared.
Can I request a dimensional drawing?
Yes. Describe your application and we send the current dimensional drawing.
In real applications
Mounted on the bottom profile to hold the glass panel closed.
The lock body is fixed to the bottom profile of the sliding door. Turning the key drives the Ø 10.00 mm pin into a receiver set into the floor or the bottom profile. With pin and receiver on the same axis, the lock stays clear of the door during normal opening and closing. Before installation, check that the bottom profile offers a flat mounting surface for the 35 mm wide front face.
Floor-level installationThe lock is aligned with its receiver on the bottom profile or rail.
Technical overview
Specifications required before ordering.
Share your application details with our technical team for dimensional drawings and compatibility guidance.
ApplicationAutomatic / sensor-operated sliding glass door
Installation pointBottom profile / floor level
Front face35 × 78.00 mm (width × height)
Locking pin diameterØ 10.00 mm
Exterior finishPowder coating
Internal mechanismZamak alloy
Package3 keys + connection hardware
ProductionNoray design, made in Türkiye
Front face dimensions
The front face measures 35 mm across and 78.00 mm high. Compare the mounting surface on the bottom profile with these figures before ordering.
Pin and receiver alignment
The Ø 10.00 mm pin and its receiver are fitted on the same axis. The pin should enter without rubbing.
Package contents
Supplied with three keys and connection hardware.
Noray product design
Product geometry developed for its intended system
Technical documents
Dimensional and compatibility support
Ready-to-install package
Supplied with keys and connection hardware
Custom production
Evaluated according to quantity and project
For your project